Master The Art Of Stone Washer Machine With These 3 Tip

The stone washer machine is suitable for washing fine and coarse materials. It has the advantages of reasonable structure, convenient maintenance, large processing capacity, low energy consumption, and high cleaning degree. It is one of the indispensable machines in the sand production line. Therefore, if you want to make sand stably, you must know how to solve the small defects in the work of the spiral sand washer. This article will introduce the common faults and solutions of the spiral sand washing machine.

1. Sand Leakage at Work

The reason for this situation is that the bolts fixing the sand mesh are loose and fall off, or the sand mesh is damaged. At this time, the connecting bolts should be tightened in time to check whether the sand mesh is worn, and the damaged sand mesh should be replaced in time to ensure the operation of the equipment.

2. Gear Breakage

1). During operation, if the spiral sand washer is not maintained in time, or the rotating shaft of the reducer and the rotating shaft of the reducer do not reach the specified parallelism, the gears of the spiral sand washer are easy to wear and damage. At this time, the specific installation distance and installation standards of each part of the sand washer should be adjusted to maintain the stability of the sand washer.

2). When checking whether the bearing of the spiral sand washer is damaged, check the integrity of the sealing ring. If the sealing ring is damaged, replace, and clean the entire ring.

3). After each work, you must check the lubricants on the bearings and other parts, and add oil or replace with clean lubricants in time. If the gear spacing changes or insufficient lubricant will reduce the flexibility of the transmission mechanism, the lubricant should be added in time, and the gear spacing should be adjusted to maintain a reasonable distance.

3. The Frame Vibrates at Work

The reason for this phenomenon is that the connecting bolts of the screw sand washer connecting frame or bearing seat are loosened. After the screw sand washing machine is finished, the connecting bolts should be tightened, and regular inspection and maintenance should be carried out in daily use.

The above are the reasons and solutions for common failures of the spiral sand washer. When using the spiral sand washer, the user should pay attention to whether the spiral sand washer has timely maintenance.